4-79/4-2*79 Centrifugal Fan
4-79 Centrifugal Fan is mainly used in general factories and large-scale buildings for indoor ventilation, air inhaling and exhaling. The gas should be no more than 80℃, non-pyrophoric, non-harmful for human body and non-corrosion for steels. The gas shall not contain adhesive matter or dust and hard particle contents greater than 150mg/m3.
4-79 Centrifugal Fan is mainly used in general factories and large-scale buildings for indoor ventilation, air inhaling and exhaling. The gas should be no more than 80℃, non-pyrophoric, non-harmful for human body and non-corrosion for steels. The gas shall not contain adhesive matter or dust and hard particle contents greater than 150mg/m3.
Key Advantages:
Impellers- They consist of 16 backward arc-shape round-plate blades, curved front plates and plate-shape back plates. They are made of steel plates and pass dynamic balancing correction. They enjoy good aerodynamic performance, high efficiency, low noise, balanced operation.
1. Air inlet -Being installed at one side of the blower in an integrated structure, it is in curved shape with the horizontally parallel section and enables air to flow into the impeller easily with little loss.
2. Driving system -It is composed of main shaft, bearing box, rolling bearing, belt pulley or coupling.
|
Item name |
4-79 Centrifugal Fan |
||
|
Parts details |
Impeller diameter |
300~2000 |
mm |
|
Speed of main shaft |
260~2000 |
r/min |
|
|
Pressure range |
226~3334 |
Pa |
|
|
Flow range |
351~625600 |
m3/h |
|
|
Structure |
Blade structure |
Backward |
|
|
Impeller support |
Single support/Double support |
||
|
Drivetrain |
A/B/C/D/E/F |
Assignable |
|
|
Lubrication |
Oil bath lubrication / grease lubrication |
Assignable |
|
|
Bearing cooling |
Circulation water cooling/air cooling |
|
|
|
Circulation oil cooling |
|
||
|
System
configuration |
Motor |
Anhui Wannan, Lu’an Jianghuai, Henan Yutong, Jiamusi, Nanyang Explosion Proof, Siemens |
|
|
Impeller, air inlet, blower casing, air damper |
Carbon steel |
Customizable |
|
|
Main shaft |
High strength carbon structure |
||
|
Bearing |
FAG, SKF, ZWZ, C&U，YLC… |
||
|
Bearing box |
Casting iron |
|
|
|
Drivetrain |
Coupling/Belt pulley/motor |
Assignable |
|
|
Foundation bolt |
Carbon steel |
|
|
|
Optional
parts |
System base frame, Protective screening, Silencer, Inlet& outlet pipeline compensator, Inlet& outlet flange, Air damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Variable-frequency drive, Special motor, System monitoring &control instrument, Lubrication system and High-level oil tank. |
||
They are applicable to normal temperature and hot gas, clean and dusty gas, powder materials and tiny granules. They can apply into boilers, dust removal, de-nitration and desulfurization, cement, metallurgy, power generation, gas and material handling, smoke exhausting. It can also be customized according to special industries.